Documentation **[[Documentation|Home]]**
====== BASIC INFORMATION ======

Name: **Power Module 5V (POE)**\\
Type: **Raspberry Pi Board**\\
Version: **2.0.0**\\
Author: **Dubravko Penezic**\\
Copyright: **Creative Commons BY-NC-SA v 3.0**\\
Implemented function:
  * **POE 802.3af Standards 10/100 DC on Spares Wires**
  * **Fuse (0.5A) and diode voltage input controlling**
  * **HRD05003 DC-DC converter with fine tune of output 5V (variable resistor)**
  * **ON/OFF capability**
  * **POE (Power Over Ethernet)**
  * **LED control signalization**
  * **Aux 5V Terminal Header Power Out**
  * **1 RGB LED for custom signalisation (GPIO)**
  * **1 Yellow LED for custom signalisation (GPIO)**
  * **DS3231 RTC (I2C GPIO)**
  * **DS18B20 Temperature Sensor (GPIO)**
  * **AT24Cxx EEPROM module with Write Protection option (I2C GPIO)**
  * **Voltage regulator AS1117 3.3V for support board elements**
  * **Pig-back connector to Raspberry Pi**
  * **Small Footprint and 4 Montage Holes**


\\ PCB Top & Bottom image:\\
{{:rpi_poe_2_0_0:img_2052_pcb.png?300|}}\\
\\ Schematic:\\
{{:rpi_poe_2_0_0:sch_poe_v200_dc-dc.png?300|}}\\
{{:rpi_poe_2_0_0:sch_poe_v200_rpi-sign.png?300|}}\\
{{:rpi_poe_2_0_0:sch_poe_v200_i2c-3.3v.png?300|}}\\
==== Dimension ====
{{:rpi_poe_2_0_0:img_2078_s4_implemented.png?300|}}\\
{{:rpi_poe_2_0_0:img_2081_s3_implemented.png?300|}}\\
{{:rpi_poe_2_0_0:img_2084_s2_implemented.png?300|}}\\
{{:rpi_poe_2_0_0:img_2087_s1_implemented.png?300|}}\\
{{:rpi_poe_2_0_0:img_2094_size_l.png?300|}}\\
{{:rpi_poe_2_0_0:img_2096_size_w.png?300|}}\\
{{:rpi_poe_2_0_0:img_2098_size_h.png?300|}}\\
==== Implemented module ====
{{:rpi_poe_2_0_0:final_rpi_poe_5v_v200.png?300|}}\\
{{:rpi_poe_2_0_0:final_bottom_rpi_poe_5v_v200.png?300|}}\\
 \\
{{:rpi_poe_2_0_0:img_2073_top_implemented_1.png?300|}}\\
{{:rpi_poe_2_0_0:img_2074_bottom_implemented_1.png?300|}}\\

==== Configuration options ====
All configuration options are available in Git repository on URL [[http://gitlab.daince.net/public]].\\
==== Check Power ====
Power presents may be check short-cuting CP1 (Input Voltage) or CP2 (Output Voltage).
{{:rpi_poe_2_0_0:img_2047_check_power.png?300|}}\\