**[[data_logger|Data Logger]]** PCB
====== supported function ======
===== Description =====
Two standard function on Arduino shileds :
  * RESET button
  * LED on digital pin 13
\\ Power regulator for +5 V and +3.3 V using AMS1117 IC
===== Used Pins =====
Digital Pin: **13**\\
Power Pin: **GND, +5V, +3.3V, VIN**\\
Other Pin: **RESET**\\
\\ \\
{{:dl_1_0_0:board_pin_dl_support.png}}\\
===== Example =====
==== Jumpers ====
{{:dl_1_0_0:top-power.png}}\\
===== DL-000 Kit (basic) =====
==== Parts ====
    * 1x PCB DATA LOGGER V 1.0
    * 1x Micro Switch SMD
    * 2x 1x2 Pin Header 0.1
    * 2x Pin Cap (red) 0.1
    * 1x Purple LED 0805 SMD
    * 1x 1K Resistor 0805 SMD
    * 1x 2x5 Pin Header 0.1

\\
==== Montage ====
{{:dl_1_0_0:dl-000_mont.png?}}