User Tools

Site Tools


data_logger_kit_a

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

data_logger_kit_a [2013/05/17 14:48]
admin
data_logger_kit_a [2016/09/01 14:17]
Line 1: Line 1:
-**[[data_logger|Data Logger]]** PCB 
-====== Kit Instruction for model A ====== 
-===== Top Side Description ===== 
-  * **PH8** Stackable Female Shield Headers 8 pin 
-  * **PH6** Stackable Female Shield Headers 6 pin 
-  * **PH3** Stackable Female Shield Headers 3 pin (reverse installation,​ with additional spacer) 
-  * **PH2** Stackable Female Shield Headers 2 pin 
-  * **P2** Male Pin Header with cap 
-  * **P3** Male Pin Header with cap 
-  * **P2x5** Male Pin Header 2x5 
-  * **LED xxxx** LED 0805 (green dot on LED shop position on >| ) 
-  * **R1K** Resistor 0805 1K (102) 
-  * **BAT 3V** Battery socket for CR2032 Battery 
-  * **CRY** - crystal 32.765kHz 405 (may be solder in any direction) 
-  * **DS1307** DS1307 chip (white circle label 1 leg - engraved dot in chip) 
-  * **AT24Cxx** AT24Cxxx chip (white circle label 1 leg - white dot on chip) 
  
-\\ 
-{{:​dl_1_0_0:​arduino_mega_data_logger_kit_top.png?​700|}} 
-\\ 
-===== Bottom Side Description ===== 
-  * **PH3** Stackable Female Shield Headers 3 pin (reverse installation,​ with additional spacer) 
-  * **LED xxxx** LED 0805 (green dot on LED shop position on >| ) 
-  * **R470E** Resistor 0805 470R (471) 
-  * **R1K** Resistor 0805 1K (102) 
-  * **R2K2** Resistor 0805 1K (222) 
-  * **R10K** Resistor 0805 10K (103) 
-  * **C100N** Capacitor 0805 0,1uF (100nF) 
-  * ** 
- 
-\\ 
-{{:​dl_1_0_0:​arduino_mega_data_logger_kit_bottom.png?​700|}} 
data_logger_kit_a.txt ยท Last modified: 2016/09/01 14:17 (external edit)